Surface Preparation:
Pressure clean to remove all biological growth from, flaking & poorly bonded materials. Make substrate repairs to
correct holes, cracks fill up with Vinal crack filler
Application:
Weather Tuff is applied to the wall / Surface using a stainless Steel trowel & trowelled to the thickness of coarsest
aggregate. The surface is then worked with a plastic trowel in either a vertical, horizontal or circular motion to
produce the desired pattern. The depth of pattern is controlled by the size of aggregate incorporated in the
material. The application of Weather Tuff is a specialist procedure & should only be carried out by an approved
applicator who has been trained in the application of Weather Tuff.
Sales & Service:
Vinal exterior is made available through a chain of authorized stockists and distributors. We insist that you
purchase through such authorized outlets only.
Free Technical Service & Advice:
Avail of our free technical advice and guidance provided at major outlets. You could also correspond at the
registered address for advice and guidance
Technical Details:
Colour |
: |
Base Colours |
Finish |
: |
Texture (Grooved) |
Thicknes |
: |
2 mm DFT (Approx) |
Solids |
: |
83.0 +_2% |
Specific Gravity |
: |
2.0+_0.05 |
Water Demand |
|
3-5% |
Drying Time |
|
3-4 hrs. |
acking |
|
25kg, 30kg, bag |
|
|
|
Note:
The information in this literature is given in good faith, but without warranty,
as conditions of storage and use vary and are beyond our control..