Surface Preparation
For Cementitius Surface
Ensure the surface is structurally sound and free from dust, loose & poorly bonded materials. Any fault or damage in the structure which may cause moisture / dampness / water penetration should be repaired. In case of any organic / fungus growth, common domestic bleaching powder (Calcium Hypochlorite 35% Chlorine) can be used effectively for anti-fungal treatment. Add 2kgs. of bleaching powder to 50 ltrs. of clean water and mix well. Clean the surface intneded for allocation. Brush the bleaching powder Mixture onto the cleaned surface and leave for 24 hours. After leaving it for a day, wash the surface well with clean water
Application
Pressure clean to remove all free from any loose particle flaking poorly bonded materials, vinal plastic distemper is applied to the wall surface using by brush roller or spray, apply one coat of vinal interior primer (water base) and two top coat vinal plastic distemper.
Application:
Pressure clean to remove all free from any loose particle flaking poorly bonded materials, vinal plastic distemper is
applied to the wall surface using by brush roller or spray, apply one coat of vinal interior primer (water base) and
two top coat vinal plastic distemper.
Surface Preparation:
All surfaces should be structurally sound, clean, free of dust, dirt & loose particles.Surface imperfections such as
cracks, holes or voids should be repaired before the application of Vinal plastic distemper Remove the dust using
the clean cloth. The vinal white wall putty plastered surface is now ready for painting.
Mixing:
Add Vinal plastic distemper to a bucket containing clean water, mixing uniformly to achieve the required thick
creamy consistency. The mixing ratio is 20 kg Vinal plastic distemper and approximately 6 to 8 liters of Water.
Sales & Services:
Environment friendly & Safe Vinal Plastic distemper It is an environmentally friendly acrylic distemper. Being nonflammable,
Vinal Plastic distemper does not carry any risks to any life. Any splash of the paint when in contact with
skin or eyes should be immediately washed with clean water, through such authorized outlets only. Vinal Plastic
distemper is made available through a chain of authorized stockiest and distributors.
Packing:
vinal plastic distemper is in 5 kg /10 kg / 20 kg plastic containers.
Environment & Safety:
Vinalux is non-toxic and non flammable, making it environment friendly.
Technical Details:
Colour |
: |
White (Base) |
Solids |
: |
55+ 2% |
Water Demand |
: |
50% |
Finish |
: |
Matt Finishing |
Specific Gravity |
: |
1.9+_0.05 |
Drying Time |
|
30 Min. |
Coverage Area |
|
5 To 6 Sq. Mtrs. Per Kg For A Two Coats |
Shades |
|
Available On Request |
Note:
The information in this literature is given in good faith, but without warranty,
as conditions of storage and use vary and are beyond our control..