VINAL-PLASTIC PAINT is a luxury interior wall finish specially formulated to impart a rich satin like sheen to decorate interior walls. It possesses excellent washability and stain resistance to keep the walls beautiful for long. Its antibacterial property provides proven protection against bacteria and also contains ultra-low VOC ensuring safe and healthy interiors
Keep the surface clean and dry. Remove dust, dirt, grease, and flaking paint from the surface and use Vinal Abrasive Papers(220) to smooth. Ensure that there is no fungus or moisture on the walls.
| Feature | Action | Benefits |
|---|---|---|
| Anti Bacterial | It does not allow fungi and bacteria to breed and form colonies on the wall | Keeps the walls hygienic. It reduces the chance of picking up allergies and keeps residents healthy |
| Luxury Sheen Finishing | It reflects light even in low intensity lighting in rooms | Gives rich luxurious look and feel to the walls |
| Ultra-Low VOC | It does not emit any odour during and after painting hence reducing the risk of any irritation, headache, nausea etc | Healthy interior ensures that the home owners can occupy the house immediately after painting |
| Sequence | :Product | No of Coats |
| Primer | Vinal Wall Primer | 1 coat (6-8 hours for drying) |
| Putty | Vinal Acrylic/ Powder putty | 1-2 coats (overnight drying) |
| Primer | Vinal Primer | 1 coat (6-8 hours for drying) |
| Top Coat | VINAL-PLASTIC PAINT | 2-3 coats (4-6 hour interval) |
For dark shades and horizontal surfaces 1-2 additional coat amy be required for better performance
of paint film.
Avoid painting when temperatures is below 10 C. Painting is not recommended if the moisture content or alkalinity of the walls is high. Moisture content of walls should be below 16% and alkalinity of wall should be below pH 9. Relative humidity should be below 85%. Painting on a newly plastered wall is recommended after 12 weeks of curing.
| Brush | : | Dilute both 1 and 2 coats with 30-40% water |
| Roller | : | Dilute both 1 and 2 coats with 30-40% water |
| Conventional Spray | : | Dilute both 1 and 2 coats with 30% water |
| During Painting | : | Always work in a well ventilated area. Wear appropriate attire, especially gloves and eye protection gear. Avoid contact with skin as it may cause irritation |
| Cleaning | : | Clean all equipments with clean water immediately after use. |
| Safety Instructions | : | In case of eye contact, rinse immediately with water and seek immediate medical treatment. To remove paint from skin, use soap and water or appropriate cleanser. In the event of spillage, contain and collect spilt paint by using sand or earth |
| Storage | Store paint in a cool, dry and well ventilated place away from heat sources, flammables or direct sunlight. Keep container tightly closed in as secure upright position. Do not store near food, drinks or animal feed. Keep out of reach of children. Do not dispose of unwanted paint into drains, water sources or open sewers. To dispose safely, pour unwanted paint into old newspapers and let dry before placing in a waste receptacle |
|
| Environment | Does not contain any added lead, mercury or chromium compounds |
| Bases | : | White and SGP4, SGP3, SGP2, SGP1, Red Bases, Yellow Bases |
| Color range | : | Please refer to Paint shade card and fan decks |
| Finish | : | Luxury Sheen |
| Coverage | : | 280-320 feet/ltr/coat & 150-175 feet/ltr/ 2 coats (Actual coverage depends on substrate condition) |
| Dry Tine | : | To touch – 30 minutes , To recoat – 4-6 hours |
| Gloss level | 60 Head: 12 to 20 units | |
| Clean Up Solvent | Clean, potable water | |
| Stability of diluted paint | 24 hours | |
| Shelf Life | 2 years from date of manufacture in original tightly closed containers | |
| Dilution | 30-40% by volume with clean, potable water. Stir well before use 20-30% by volume for darker shades |
The information in this literature is given in good faith, but without warranty,
as conditions of storage and use vary and are beyond our control..